Only logged in customers who have purchased this product may leave a review.
Cisco Wireless Controller 8540 & Cisco 3850 48P 1G PoE+ Uplink 1G & 10*Cisco Air-AP2802i Access Point AIR-AP2802i-B-K9
📌Cisco Wireless Controller 8540
📌Cisco 3850 48P 1G PoE+ Uplink 1G
48Port 1G PoE+
Uplink 1G
Layer 3 Switch
Web Interface
With Rackmounts
📌QTY : 10
Cisco Air-AP2802i Access Point AIR-AP2802i-B-K9
OR:
⚫️Qty :10
Cisco Aironet-AP3802i Access Point AIR-AP3802i-B-K9
Related products
3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
Lenovo RackSwitch G8272 – 48x10Gb (SFP/SFP+) Ports – 6x40Gb(QSFP+) Ports – Layer 3 – Managed – Dual Power supply – Rear-to-Front Airflow
- The Enterprise NOS (ENOS) has a feature-rich design with virtualization, high availability, and enterprise class Layer 2 and Layer 3 functionality.
- It supports Network virtualization VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
- Advanced Layer 2/3/4 switching and routing capabilities, including Virtual Router Redundancy Protocol (VRRP), Border Gateway Protocol (BGP), and Equal-Cost Multipath (ECMP)
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- Support for OpenFlow 1.3 and 1.4 for software-defined networking (SDN) applications
- Hot-swappable power supplies and fan modules for high availability and easy maintenance
NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]
- Ease of use (WEB GUI or CLI)
- Fanless silent design
- Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
- Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
- IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
- Supports IGMPv1/v2/v3 snooping as a multicast function
- Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
- Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
- SNMPv1/v2c/v3, alive monitoring by ping response is possible
- Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console
Brocade ICX 6610-48poe+, Switch-L3-Managed-48x 10/100/1000 + 8x SFP 10G + – Desktop, Rack Mountable
- Delivers chassis-level performance and availability, providing an optimal user experience for streaming video, Virtual Desktop Infrastructure (VDI), Unified Communications (UC), and other mission-critical campus applications
- Offers unprecedented stacking performance with 320 Gbps of stacking bandwidth
- Provides unmatched availability with four fully redundant 40 Gbps stacking ports per switch, hitless stacking failover, hot switch replacement, and dual hot-swappable power supplies and fan assemblies
- Simplifies network operations and protects investments with Brocade HyperEdge™ technology
NETGEAR Switch ( GS728TP) -24 x 1 Gigabit Ethernet POE
- Port Configuration- 28 ports, includes 24 gigabit ports and 4 x 1G SFP ports
- Power-Over-Ethernet- 24 PoE+ ports with 190W total power budget
- Flexibility From Uplink Ports- 4 x 1G SFP ports
- Advanced Configuration and Control- Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management.
- Energy Efficient- Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
- Built To Last- Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Aruba S2500 Mobility Access Switch-24P-4x10G SFP+ POE
The S2500 Mobility Access Switch from Aruba Networks® extends role-based user access, security and operational simplicity to wired networks.
A vital part of Aruba Mobility-Defined NetworksTM, the S2500 delivers secure, virtualized access services to users, regardless of their location, access method, device or applications
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
Recently Viewed
CISCO CATALYST 3650 24PORT 1G POE+ UPLINK 1G WITH 4 GBICS SFP 1G
⚫CISCO CATALYST 3650 24PORT 1G POE+ UPLINK 1G WITH 4 GBICS SFP 1G
▪ 24PORT 1G POE+
▪ UPLINK 1G
▪ LAYER 3 SWITCH
▪ Web interface
▪ Dual Power Supply 1025W
▪ WITH RACKMOUNTS
▪ WITH 4 GBICS SFP 1G 💥
🔺1 Year Warranty
CISCO CATALYST 3650 24PORT 1G POE+ UPLINK 1G WITH 4 GBICS SFP 1G
⚫CISCO CATALYST 3650 24PORT 1G POE+ UPLINK 1G WITH 4 GBICS SFP 1G
▪ 24PORT 1G POE+
▪ UPLINK 1G
▪ LAYER 3 SWITCH
▪ Web interface
▪ Dual Power Supply 640W
▪ WITH RACKMOUNTS
▪ WITH 4 GBICS SFP 1G 💥
🔺1 Year Warranty
HP ProLiant DL585, Dual Processors,16 GB DDR3 RAM, 8x 300G 10K, Dual 460W PSUs
- Form Factor: 1U Rack Server
- CPU: Dual Processors
- Ram: 16GB DDR3
- Storage: 8X 300G SAS 10K
- Raid Controller:HP Smart Array P410i/512MB FBWC or Zero Memory Controller
- Assured Warranty
- Quick Shipping
- 24/7 Tech Support
Cisco Catalyst 3650 48P PoE+ Uplink 1G + ARUBA S2500 48P 1G PoE Uplink 1G
📌Cisco Catalyst 3650 48P PoE+ Uplink 1G
◾48Port 1G PoE+
◾Uplink 1G
◾Layer 3 Switch
◾ Power Supply 1025W
🔺With Rackmounts
____________
📌ARUBA S2500 48P 1G PoE Uplink 1G
* 48Port 1G POE
* Uplink 4Port SFP 1G
* Layer 3 Switch
* Web interface
* With Rackmounts
4 Cables Juniper DAC cable 3M SFP+ 10G + JUNIPER – EX3300 48Port POE+ 4Port SFP+ 10G FREE
QTY : 4 Cables
Juniper DAC cable 3M SFP+ 10G
______________________
JUNIPER – EX3300 48port POE+ 4port SFP+ 10G
48 port 1G POE+
4 port SFP+ 10G
Layer 3 Switch
CISCO CATALYST 3650 48PORT 1G POE+ UPLINK 1G WITH 4 GBICS SFP 1G
⚫CISCO CATALYST 3650 48PORT 1G POE+ UPLINK 1G WITH 4 GBICS SFP 1G
▪ 48PORT 1G POE+
▪ UPLINK 1G
▪ LAYER 3 SWITCH
▪ Web interface
▪ Dual Power Supply 1025W
▪ WITH RACKMOUNTS
▪ WITH 4 GBICS SFP 1G 💥
🔺1 Year Warranty
📌HPE Proliant DL 380 G10 16 BAY SFF ( Including 8 Bay NVME )
📌HPE Proliant DL 380 G10 16 BAY SFF ( Including 8 Bay NVME )
▪️ CPU : DUAL INTEL XEON Gold 5118
▪️ Memory : 16 GB DDR4 ECC
▪️ STORAGE : 2 * 900G SAS 10K Enterprise
▪️ NETWORK : HPE 1 Gb 331i Ethernet adapter 4-ports per controller
▪️ DUAL POWER SUPPLY
▪️ 1 Years Warranty
Cisco Router (ISR 4321) – Layer 3 – Managed – 2 WAN Ports – 2 LAN Ports – and SFP
- Built-in intelligent network capabilities and convergence including Multiprotocol Label Switching (MPLS) VPNs
- The modular network interfaces with diverse connection options for load-balancing and network resiliency and modular interfaces with online removal and insertion (OIR) for module upgrades without network disruption.




































Reviews
There are no reviews yet.